qc-plate 100

QC-plate 100


The QC-plate100 is a low-cost QC plate. It is mainly intended to check a single-channel reader but can be used for a multichannel reader too.

The QC-plate 100 consists of a precise milled aluminum body in the dimensions of a SBS standard microplate.
In positions A1 to H1 and A12 to H12 there are precise drilled holes to check the plate alignment.

Neutral density filters in positions D4, D6, D8 and D10 with nominal absorbance of 0.2; 1.0; 1.4 and 2.5 are used to verify the accuracy, precision and linearity. Zero OD as well as overflow is also tested.

Each QC-plate 100 is supplied with a calibration sheet showing the absorbance for each neutral density filter at different wavelengths. The calibration data can be traced back to NIST standard. A QC-program is available for several microplate readers which automates the whole QC test. Please contact us to see if your reader is supported.




Copyright © 2013 - MPI-Design
All Rights Reserved